通風管道是建筑通風的重要設施，它在通風和保證室內空氣流通方面發揮著重要作用。一般來說，它是由金屬材料制成的。然而，有些通風管道需要輸送高溫空氣。
濟南通風管道制造企業總結了以下幾點:
Ventilation pipeline is an important facility for building ventilation. It plays an important role in ventilation and ensuring indoor air circulation. Generally speaking, it is made of metal materials. However, some ventilation pipes need to deliver high temperature air. Jinan Ventilation Pipeline Manufacturing Enterprise summarizes the following points:
蠕變:鋼在高溫外力作用下，隨著時間的延長，會緩慢而連續地產生塑性變形，稱為蠕變。鋼的蠕變特性與溫度和應力密切相關。當溫度或應力增加時，蠕變速度加快。因此，鍋爐、蒸汽管道、壓力容器等長期高溫運行的鋼材應具有良好的蠕變抗力，以防止蠕變引起的大量變形，導致結構斷裂和爆炸等惡性事故。
Creep: Under the action of high temperature external force, steel will produce plastic deformation slowly and continuously over time, which is called creep. Creep properties of steel are closely related to temperature and stress. The creep rate increases with the increase of temperature or stress. Therefore, steel products such as boilers, steam pipes, pressure vessels and other long-term high-temperature operation should have good creep resistance to prevent a large number of deformation caused by creep, leading to structural fracture and explosion and other malignant accidents.
球狀化處理和石墨化:在高溫的作用下,碳鋼的滲碳體將遷移和聚集能量,形成的滲碳體在鐵氧體粗粒和混合,球從片狀滲碳體將逐漸改變,稱為球狀化處理。由于石墨的強度很低，而且出現在片狀，使材料的強度大大降低，脆性增加，稱為材料的石墨化。
Spherical treatment and graphitization: Under the action of high temperature, the cementite of carbon steel will migrate and accumulate energy. The cementite formed is mixed with coarse ferrite particles, and the sphere will gradually change from flake cementite, which is called spheroidization treatment. Graphite is called graphitization of materials because of its low strength and flaky appearance, which greatly reduces the strength and increases the brittleness of materials.
熱疲勞性能。鋼結構長期處于冷熱交替狀態，在溫差變化引起的熱應力作用下，材料內部會產生細小的裂紋，導致斷裂。因此，在溫度波動的工況下，鋼的結構和管道應考慮熱疲勞性能。
Thermal fatigue properties. The steel structure is in the alternating state of heat and cold for a long time. Under the action of thermal stress caused by temperature difference, tiny cracks will occur inside the material, leading to fracture. Therefore, in the case of temperature fluctuation, the thermal fatigue properties of steel structures and pipes should be considered.
More relevant information can be consulted by clicking on the official website: http://m.xyphw.com
上一篇：浸滲加工工藝的領域涉及哪些？
下一篇：消聲器設備使用時需要注意哪些？
